The tools required are a soldering iron rated at least 35W, some rosin core solder and a phillips head screwdriver.
Parts List
1 600v 40 amp alternistor with attached leads
1 600v 6 amp alternistor with attached leads
1 25w 75 ohm resistor with attached leads
1 400v 0.1 mf capacitor
1 250k linear taper potentiometer with 0.25" shaft and attached leads
1 33v failover diac for triggering the alternistor
1 10 gauge tinned and stripped power leads
1 10 gauge tinned and stripped element leads with lugs soldered onto ends
1 circuit board
1 pre-drilled heat sink with component mounting screws
1 heat sink compound
